************************************************************
* REQUIREMENTS FOR USING THE FIRMWARE(FW) UPDATE TOOL
************************************************************
POWER
Please ensure if you are updating a mobile system that your
battery is charged up and your system is plugged into a wall 
socket. Do not unplug your system during the firmware update
process as this could render your SSD inoperable. 

BIOS STORAGE CONFIGURATION
This tool will only function correctly with the BIOS SATA ports 
configured to "Legacy" / "Compatibility" mode, or "IDE" mode.  
Some BIOS configurations support SATA port modes such as "IRRT", 
"RAID", and "Native + IDE" mode, which are not supported by this 
utility. 
